Water Heaters In Lynnwood, Lake Stevens, WA And Surrounding Areas
If you think your heater has not been operating properly, search for water heater professionals in Lynnwood even you can contact us for the furnace installation in Lynnwood to address the issue and avoid costly repairs before it’s too late.
Four Signs You Need Water Heater Repair
Your water heater will give you some warning signs when it malfunctions. Below is the list of 4 such warning signs you will get when your heater needs a repair.
No Hot Water
Not enough warm water is a telltale sign your water heater gives you when it needs repair. If you find your water to be cold even after turning the heater on, there is a problem, and you need to get it fixed by a professional immediately.
If you find water around your water heater, take a closer look, as there might be leakage. Leakage can be caused due to damaged pipes or loose joints and can further damage other unit components. It can even create mold around the walls, causing damage to your home. So it is necessary to take care of leaks timely by calling a professional for water heaters in Marysville.
Unusual noises from the water heater or other appliances are never a good sign. If you notice bubbling, rumbling or crackling sounds from your heater, it means it isn’t working properly and requires professional help.
If you find discolored water coming out of the tap, it indicates a problem. The metal inside the water heater can rust with overtime usage, causing a rusty water flow. It is not always your heater behind this problem. Sometimes, it can be the pipes also. So if you face such a situation, the best option would be to search for professionals for furnace repair in Marysville.
How to Improve the Water Heater’s Efficiency?
Your water heater can lose its efficiency after working continuously for years, making your energy bills high. Below are four ways you can follow to restore the efficiency of your water heater.
Flush the Tank
Sediment can build up in the bottom of your water heater tank with overtime usage. It will make your heater less efficient and poses a risk of damage to the tank. So to avoid this, you should flush the tank every few years to remove this sediment buildup. So contact us for the heating repair in Marysville.
Adjust the Thermostat
The thermostat controls the water heater and determines how hot your water is. If the thermostat is set too high, it will lead to more energy consumption by the heater. If it’s set too low, there is a risk of bacteria forming in the tank water. Thus as per experts turning the thermostat to 120 degrees is the best option for homeowners. Contact our technicians for furnace maintenance near me.
Check the Anode Rod
The anode rod protects the tank from corrosion, but it can corrode itself over time, making the heater less efficient. So, you should keep a check on the anode rod and replace it if necessary.
Insulate the Tank
The water heater tanks are made of metal. Heat can escape from these tanks as metal is a good conductor of heat, making your heater less efficient. You will have to insulate the tank with a wrap or blanket to solve this problem.
If your water heater has been there for more than ten years, it is probably the right time to upgrade to a new efficient one. Your ten-year-old heater would have lost all its efficiency after working for many years. Thus, upgrading to an efficient one will save you money on energy bills.
If your water heater is not working as it should, or if you need help with any repair or replacement, contact us at HVAC service near you and get the services you deserve.
Frequently Asked Questions (FAQs)
The most common water heater problem is water leaks. With overtime usage, any water heater can start leaking as the water will eventually erode the tank, creating cracks or fractures. Your water connections are loose if the leak is from the top of the tank.
After replacing the water heater, check for any leaks. First, turn on the gas and apply a mixture of dishwashing liquid and water over the joints to check connections for leaks. If you notice bubbles in this mixture, it means there is a leak, and you should call a professional to solve the issue.
If your water heater is old or in bad condition, it is better to replace it before it fails. If it isn’t replaced at the right time and fails, you will be left without hot water, and worse still, it can cause damage to your home.
Yes, you can fix a leaking water heater. Some water heater leaks are less serious and can be easily fixed by a homeowner in a few steps, while some can be serious and require the assistance of a professional.
As per the manufacturers, water heaters have a life expectancy of about 10 to 12 years. This lifespan is not specific as it depends on many factors, such as location, unit design, maintenance, proper installation, and water quality.